Start up

During startup a pc pass que points where the user may press the F2 or F12 command and enter into a differnt mode. One of the modes is called setup, where critical computer configurations are set.

How to enter into Setup:

Windows xp

• Start your computer and hold down the F2 key quickly when the black screen prompts. If you do not hold down the F2 key, the computer will continue to boot into the operating system welcome screen.

Note: The computer should now be in setup mode where the make and model of the
          computer is at the top left corner of the screen.

Inside NetBios:

• Confirm you are in the NetBios by viewing a "System" link in the navigator window at the top on the left side of the screen.

Inside the "System Menu"

• System Information
• Processor Information
• Memory Information
• PCI
• Date/Time
• Boot Sequence
• HDD Boot Sequence

Note: Depending on the type of computer you have, that may be all under the "System
          Menu."

Next under the "System" link in the navigator window on the left side of the screen, there should be a "Drives" link where you will see the following menu items listed when you navigate to "Drives," using the up or down arrows on your computer's keyboard.

Note: Your mouse will not function inside of NetBios.

When "Drives" is highlighted, press enter.  A list should expand from underneath.  The list should enclude the following items:

• Diskett Drive
• Drive 0:
• Drive 1:
• SMART Reporting 

By now you should be certain you are at the right location inside your computer.  However to ensure no errors, look for the following links under "Systems" and "Drives":

• Onboard Devices
• Video
• Performance
• Security
• Power Management
• Maintenance
• POST Behavior